I didn’t see the 1987 Masters of the Universe Movie (or really know anything about it, other than one was made) until probably the early 90s, when I saw it on TV. Even though I considered myself too old for toys at the time, I still felt a little affronted that the designs of the main characters had been changed so much. Despite myself, I stayed for it and watched the whole movie. It was actually a pretty fun little film. As an adult I can really appreciate the beauty of the new designs, even if I might question the wisdom of straying so far from the source material.

Of the newly introduced characters, Saurod was undoubtedly the coolest. What’s not to like about an armored lizard man that can shoot sparks from his mouth?

Design & Development

Saurod was designed for the movie by William Stout. Stout actually went through a number of lizard/dinosaur designs, and several were closer to beasts than to anything humanoid. All of his designs below are, in my opinion, gorgeous:

Stout’s lizard concept evolved into a more upright, human-like creature, initially with minimal armor and a muscular build:

Image source: The Power of Grayskull documentary, via Dušan M.

The character continued to evolve to include a helmet and mask design, body armor, and slimmer build:

Claudio Mazzoli took Stout’s design (above) and turned it into a full-color painting:

The costume continued to evolve until the nearly final movie look, pictured below:

The costume for the character (played by Pons Maar) was exquisitely detailed and quite convincing, even given the low budget for the film:

Saurod had retractable claws in the movie.

Sadly, in the Movie, Saurod didn’t get a lot screen time. Skeletor destroyed him as an example after his henchmen failed to recover the Cosmic Key:

Mattel translated the movie design into an action feature, which was released in 1987. The prototype, shown below, is very similar to the final figure, except for the gun which is smaller and silver rather than black. They eyes are also round with white pupils:

The cross sell artwork was apparently based off of the prototype, as it features the same silver gun:

Toy & Packaging

The final toy was produced in a metallic bronze plastic, similar-looking to that used on various figures in the New Adventures of He-Man toyline (especially Hoove). The figure is sculpted with all new parts, just like the other two movie figures. Because he’s so radically different-looking from most other MOTU figures, he can look out of place on the shelf, but he does seem to fit well with late designs like Blast Attak and Laser Light Skeletor.

Saurod can have varying degrees of a dark overspray on the armor. Sometimes it’s barely present, and other times it’s applied very liberally:

The details on the sculpture seem quite soft, especially compared to the movie costume. It does have quite a fun action feature – pushing the lever on the figures back causes sparks to shoot out of the mouth. The movie character, however, didn’t have this ability (he did have retractable claws). On the back of the packaging, the sparks are called out as a “laser”, although in the commercial he is said to shoot lightning from his mouth.

I presume the artwork on the front of the card was done by Bruce Timm, who did several similar pieces. The art on the back was done by Errol McCarthy.

Errol McCarthy original line art. Image source: He-Man.org

Saurod, along with Megator, was the last figure of the original MOTU line that Mattel filed a trademark on – April 27, 1987.

Comics and Stories

Saurod, Gwildor and Blade were all packaged with the same minicomic: The Cosmic Key. The story doesn’t have anything to do with the movie, however. A cosmic force called the Evil Cloud gives Skeletor evil powers, including the ability to summon Saurod and Blade, and He-Man must call on Gwildor to stop the power of the entity.

Saurod has a much heavier build in the comic than his actual toy had. That makes me think that perhaps at an earlier stage of design, Mattel had planned to with reuse one of the existing heavily muscled body types for the figure.

Update: Javier Peña in the comments noted that some of the panels in the above comic were retraced from “The Terror Claws Strike” (also “The Ultimate Battleground”), illustrated by Bruce Timm. Now Jukka Issakainen has shared this collage he created of the copied panels:

Some versions of the minicomic actually had the Powers of Grayskull artwork on the back, which would have been the artwork on the front of the cards for He-Ro and Eldor, had they been produced:

Saurod makes a couple of appearances in the US Masters of the Universe Magazine. In the 1987 Summer issue, Saurod shoots actual lasers from his mouth, but is thwarted by Snout Spout:

In the 1988 Winter issue, Saurod and Blade team up with Hordak against He-Man and She-Ra:

In issue 10 of the 1987 Star Comics MOTU series, Saurod shoots out sparks, just like his action feature. They seem to have some kind of venomous quality, as they knock out Man-At-Arms and there appears to be no “antidote.”

Saurod also appears in the November 1987 Star Comics story, The Motion Picture, based on the plot from the film. The artwork replicates the movie designs (or prototype designs) only for the newly introduced characters. Established characters like He-Man, Skeletor and Evil-Lyn are drawn with their classic toy looks:

Saurod also appears in the He-Man newspaper comic strips. Thanks to Dušan M. for pointing that out. Dušan notes: “He’s bit more human-like and carries a flame thrower. Like with some other new characters, the colourist doesn’t seem to have had a proper colouring reference so his colours constantly change.”

Image source: Dark Horse’ He-Man Newspaper Comics collection.

Advertising

Saurod showed up in a few ads and catalogs, although of course coming at the end of the line he doesn’t appear in all that many:

Artwork

Saurod makes an appearance in William George’s Preternia poster, as well as in a movie poster by Earl Norem:

Saurod Resurrected

One curiosity: The Saurod costume was actually reused for another film: Star Hunter (1996), a low budget take on the Predator franchise. I learned about this via the Spanish language Blog de Salguero.

Star Hunter, 1996. The external armor is the same, but the pieces underneath have been changed.

Saurod In Action

Øyvind Meisfjord has contributed the following image and videos of Saurod in action:

This is the Italian release of Saurod, which has copper colored armor on its limbs.

Masters of the Universe, for all its diversity and creativity, was quite an economical toyline, creatively (and sometimes uncreatively) using and reusing the same molds over and over again throughout its run. Sometimes this was done fairly invisibly, and other times it was as plain as the nose on Faker‘s face.

In this series I’ll be cataloging the reuse of existing molds, in context of what is known and what is likely about which figures were created in what order. For example, He-Man’s prototype was almost certainly finished before Man-At-Arms, so Man-At-Arms reused He-Man’s legs, rather than vice versa. I’ll also include parts that were reused from other toylines.

Sometimes existing parts were modified for use in new toys. For example, Beast Man’s chest seems to have been based on He-Man’s chest sculpt, albeit with a great deal of hair added to it. This didn’t save money on tooling, but it did save some time and effort for the sculptor. I’ll point this out whenever I see it. Whenever a modified part is used again, however, I’ll refer to it as belonging to the toy that used it first (for example, Stratos and Zodac reuse Beast Man’s chest).

I won’t comment on “invisible” parts, such as neck pegs or waist springs that are normally not seen.

First, the toys from 1987 that had (at the time) all new parts. For fun, I’m including toys that were advertised as part of the 1987 line, but never released:

He-Ro (unreleased)

Eldor (unreleased)

Gyrattacker (unreleased)

Rotar

Sorceress

Mosquitor

Sssqueeze

Beam-Blaster & Artilleray

Blade

Gwildor

Saurod

Tyrantisaurus Rex

Bionatops

Turbodactyl

Gigantisaur (unreleased)

These toys from 1987 reused some existing parts – some of those parts were first created in the same year, however:

King Randor

Clamp Champ

Blast-Attak

Ninjor

Scare Glow

Buzz-Saw Hordak

Snake Face

Twistoid

Cliff Climber/Scubattack/Tower Tools

As with 1986, there was quite a bit of new tooling used in the 1987 line, sprinkled with some liberal reuse of parts in selected figures like Scare Glow and Ninjor. The Powers of Grayskull line saw a partial release with several of the dinosaur figures, but unfortunately its main protagonists (He-Ro and Eldor) were never sold in stores.

Update: Øyvind and an anonymous person in the comments pointed out that Buzz Saw Hordak doesn’t have the original Hordak legs. It looks like he has different leg musculature and enlarged feet. I believe some versions of Hurricane Hordak also have these legs. Thanks for the correction!

Parts Reuse series:

Battle Ram