Announced in 2017, Super7’s vintage style, 5.5″ Filmation inspired Skeletor figure was released in 2018 along with similar versions of He-Man, She-Ra and Hordak. The design ethos seems to be based on the following premise: what if, in the 1980s, Mattel released a series of He-Man variant figures that were “as seen on TV”? That’s pretty much exactly what we get with this series, including the occasional design shortcuts that Mattel might plausibly have implemented in the 80s.
Design & Development
Within the packaging for Skeletor we get a brief write-up of the history of how Skeletor’s design was translated from toy to cartoon:
In the above sheet (put together by The Power and The Honor Foundation), we see the vintage Skeletor figure, along with a work in progress and a finalized version of Skeletor’s animated design. His animated appearance in an early Castle Grayskull commercial is also referenced, although an image isn’t included, likely because most images of Skeletor in the commercial are close-ups.
In Skeletor’s first animated appearance (a commercial animated by Filmation Studios to help advertise the toyline), Skeletor more or less follows the design of the action figure, including the highly detailed costume, monster feet, and red eyes. The only liberty taken is with his face, which doesn’t feature the green paint applications of the action feature. The commercial can be viewed in its entirety here: https://www.instagram.com/p/BpmvudrnPlj/
As shown in the card that came with the Super7 Skeletor figure, Skeletor’s more detailed action figure design was simplified for ease of animation once the animated series was greenlit for development. The evolving and finalized designs can also be seen in the images below. He also has a more realistic hood design compared to the vintage action figure, and an angrier-looking face.
In some ways these changes brought him a bit closer to Mark Taylor‘s original design, which also featured a larger hood and relatively human-looking feet
In fact, material from the Series Guide shows an intermediate Skeletor design that is partway between Mark Taylor’s original concept and the Filmation version:
The prototype Skeletor figure was revealed in February of 2017 at New York Toy Fair. It’s pretty close to the mass produced figure, although his colors are a bit different, with paler blue skin, a more vivid yellow skull, and black fingernails:
Design-wise, the sculpt of the chest and pelvis seem to be taken directly from the vintage 1982 figure. The arms are based on the vintage figure as well, but the “fin” structures on the forearms have been removed. The feet have been changed, removing the three-toed feet and substituting the streamlined boots from the cartoon.
The production figure, as is always the case, isn’t quite as sharp as the prototype. It’s pretty closely based on the Filmation source material, but of course with the bulky proportions of the vintage toy.
The figure comes with a pretty Filmation-accurate Havoc Staff, with the exception of the color, which came out more pink than light purple. Skeletor also includes a purple version of the He-Man’s cartoon style Power Sword (not a weapon Skeletor used in the cartoon, but a nod to the vintage figure), as well as a half Power Sword that fits together with the 2018 Super7 He-Man figure. The Swords are pretty closely based on the animated design, but also feature a hand guard, which Mattel tended to use on almost all of its swords in the vintage line.
Out of the packaging the armor tends to ride a little low, and it’s fairly stiff plastic, making it difficult to adjust. However, 10 seconds with a hair dryer makes it temporarily rubbery and pliable, which allowed me to adjust the armor to sit correctly, as shown in my example above.
Compared to the vintage figure, the 2018 version is certainly less detailed, but the face actually looks a bit more evil. The new version has a hard head as opposed to the soft, hollow polyvinyl of the original. The Filmation-inspired Skeletor’s blue skin is also quite vivid compared to the pale blue of the original.
The design of the packaging was directed by The Power and the Honor Foundation. The main carded version (which was actually released second) is based on the original 1980s design, with an “AS SEEN ON TV” burst which, although not featured on vintage MOTU packaging, was pretty commercially ubiquitous at one point. The shape of the bubble on the front has been altered compared to the vintage packaging.
The main artwork on the back was done by Errol McCarthy, who worked on cardback art for most of the vintage MOTU figures. The cross sell artwork and the insert were illustrated by Emiliano Santalucia:
The first version to be released was actually a two pack, in the style of some of the vintage figure gift sets. This set was released in limited numbers.
Another limited release of the figure came in the form of a “Los Amos” package, based on the design of vintage “Los Amos” (Mexico) figures:
Return to Table of Contents.