Author: Adam McCombs

Heroic Warriors

Guest Post: Mark Taylor’s Vision for Zodac

Posted on by Adam McCombs

Guest article by Dejan Dimitrovski

Zodac B Sheet from the Mark Taylor Portfolio, published by Super7/The Power and the
Honor Foundation


Initially, in 1982, Mattel planned eight figures for Wave 1 of the Masters of the Universe toy line. Envisioned by Mark Taylor, they were supposed to be He-Man, Skeletor, Teela, Sorceress (early snake-themed version), Beast Man, Mer-Man, Stratos, and Man-At Arms.

Mockup of what the 8 back cards might have looked like if the Sorceress hadn’t been dropped from the first wave, and if the figures hadn’t been cost reduced. Put together by Adam McCombs using Mark Taylor’s concept art.

But when Teela and the Sorceress were blended into one figure, it left seven figures instead of eight. Thus, Zodac was developed as the last character of the original eight figures, and released in second half of 1982.

1982 8-back cardback

In this text I will try to review and summarize all the information that was already revealed on the original Zodac character, as well as add some information revealed to me by Rebecca and Mark Taylor.

The original Zodac B-Sheet by Mark Taylor, dating from 1981, shows that this character was at first named differently “Sensor”. He was renamed a few times more before getting his final name “Zodac”. Possibly, the name Zodac is derived from the word ZODIAC – a term used in both astronomy and astrology, referring to the area of the sky that corresponds to the Sun’s apparent annual path around Earth in the course of a year. The association of this character with stars and cosmos (and the fact that Zodac is made a Cosmic Enforcer sailing through space), would go in favor of this name speculation.

The figure design reuses body parts formerly seen in other figures but introduces few new parts as well – a decision of Mattel to save money. It borrowed Skeletor‘s arms and claw-like feet and Beast Man‘s furry chest, while the new parts included his head, armor, and blaster. As a result, Zodac seems to be a being not entirely human, rather a member of a hybrid-like race. In an audio interview (conducted by Matt Jozwiak, sometime around 2006.) Mark Taylor says: “I don’t think he is completely human… He may even be a throwback to these people, to however it was that originally occupied Castle Grayskull. He knows a lot of stuff that nobody else knows about the history of Castle Grayskull.”

In the same interview, Mark says he never saw him as a bounty hunter, as he was labeled in the 1981 Mattel licensing kit, where his black and white illustration was presented with the following text: “ZODAC figure. The cosmic enforcer. The bounty hunter of our exciting universe”. Mark makes a comment on how that would be an idea too close to Lucas, referring to Boba Fett the popular character from Star Wars franchise.

There is a lot of controversy on whether Zodac was originally imagined to be either a good or an evil character. On Grayskull Con 2014 – “Power & Honor Foundation” Panel by Emiliano Santalucia, Mark’s original Zodac B Sheet art was shown under which was a label indicating that Zodac is an ally of He-Man, which would lead to the conclusion that Zodac was intended to be a heroic warrior.

But, in the above mentioned audio interview, Mark describes Zodac as an almost independent character, not inclined to follow either He-Man or Skeletor. He further adds that he and Man-at-Arms kind of understand each other pretty well, as both are warriors who are fascinated by technology. Zodac had his own reasons into getting into Castle Grayskull and they have to do with technology found in there. He knew that in Castle Grayskull is a great, wonderful weapon that he has been trained how to use, and if he could pull it out, he would gain great power and advantages in battle.

However, in 2017 Mark and Rebecca Taylor provided us with a back-story, revealing more information intended for this character:

Zodac was imagined as an evil counterpart of Man-at-Arms – a negative knight so to speak. He was to fight on Skeletor’s side and go to war against Man-At-Arms and He-Man. As, they fought “all day and all night”, Zodac learned to respect Man-At-Arms so much as a warrior, that he betrayed Skeletor and switched sides – from Skeletor’s Legions of Evil to He-Man and Man-At-Arms’s side. Skeletor was furious with Zodac and he came after him. Zodac then, along with his new allies, fought Skeletor to a stand still. And thus, he then became a trusted ally of He-Man.

At some point, Zodac was to go to Castle Grayskull and recognize the spacesuit from an ancient battle field, and he becomes determined to duplicate that suit. Apparently, Mark also had the idea that a variant of Zodac could be made, associated with the spacesuit: “The next time we see Zodac in a box, we see parts of the spacesuit that snap on to him that give him different abilities.”

It seems that the technology in Castle Grayskull that Zodac was seeking, mentioned in the audio interview, was to be the spacesuit which would give him different powers and abilities. So in conclusion, Zodac would have been He-Man’s ally, as labeled beneath his B Sheet, but he first had to walk the path from Skeletor to He-Man, from evil to good.

Perhaps this Zodac back-story info could give us some hints on why he was shown as an evil warrior in the toy marketing, including the card back art by Errol McCarthy where we see Zodac shooting at He-Man and Man-at-Arms. As with the initial Sorceress, a similar motif was conceived here, that of switching sides and teaming up with either He-Man or Skeletor.

But later, in the upcoming media, he was made a neutral character in the end, picking either He-Man’s or Skeletor’s side as he tried to maintain the balance of good and evil on Eternia. Of course, in the various ’80s media and marketing there were exceptions to this, as he was sometimes depicted as completely heroic and at other times as Skeletor’s lackey, (this will be reviewed in more detail in the upcoming articles on Zodac).

I wish to express my gratitude to Rebecca Salari Taylor and Mark Taylor for being willing to reveal and share the information on the original Zodac character with us. Also, I would like to express my thanks to my friends Jukka Issakainen and Adam McCombs in providing help and information on writing this post.

Further reading:

Masters of the Taylorverse

Zodac: Cosmic Enforcer

Thank you to the following individuals who are current Patreon supporters!

  • Adam A.
  • Allison T.
  • Ben M.
  • Clare L.
  • Eric H.
  • João S.
  • Jon E.
  • Max I.
  • Mike G.
  • MotuOriginsCork
  • Orion W.
  • Øyvind M.
  • Pablo G.
  • Philip O.
  • Robert B.
  • That Clyde Guy

Want to support the blog? Consider becoming a Patreon supporter. You’ll also gain access to exclusive content and early access to posts on the blog. Thank you!

5
Comics, Filmation

The Spirit of Grayskull

Posted on by Adam McCombs

Written by Adam McCombs

The Spirit of Grayskull, also known as the Spirit of the Castle, is a reoccurring character in early Masters of the Universe stories. I’ll plot out the development of the character and the places it appeared.

The very first attempt at a Masters of the Universe story was Don Glut’s “Fighting Foe Men” treatment, prior to the first minicomics. Although the Spirit of Grayskull doesn’t appear in The Fighting Foe-Men, Mattel did provide this feedback regarding his treatment of Castle Grayskull:

Castle Grayskull

  • More mysterious
  • Should hold vast treasures
  • Should hold secrets of the universe
  • Add dangers for the unwary

Apparently one of things Glut added to make the castle more mysterious was to add “the Spirit of the Castle,” which appears in three of the four minicomics he wrote.

He-Man and the Power Sword

We see the Spirit appear first in He-Man and the Power Sword, the first published minicomic in the Masters of the Universe line. As Skeletor and Beast Man approach the castle, the Spirit warns them away:

An eerie voice — that of the castle’s all-present Spirit — warned them: “Go back! The secrets and treasures of Grayskull are for no one to posses! Go away…”

To which Skeletor responds:

“I defy you, Spirit of the Castle! Your many secrets shall be mine! I hold half of the mystic Power Sword! I shall soon possess the other half which is hidden within your walls. Then I will have full power! And none of your deadly traps will stop me!”

Later in the story, they encounter a metal door barring their way:

But as they touched the door, the Spirit of the Castle cursed them and unleashed its ghostly demons.

Skeletor vanquishes the ghost demons with his sword and says:

“Again I defeat you, Spirit of the Castle! Now, to seize your greatest treasure!”

Eventually the heroes are able to defeat Skeletor and Beast Man and send them running away. On the last page of the story the Spirt appears over the castle and says:

“You truly are the ‘Masters of the Universe’ who are destined to protect my secrets from evil forces. You should at least have some small reward.”

At this point the Spirit gifts them with Teela’s unicorn steed.

King of Castle Grayskull

In King of Castle Grayskull, Teela replaces the Sorceress (aka Goddess) as the guardian of Castle Grayskull.

Teela listened as the Spirit of the Castle spoke. “Legend tells of a warrior who will find the split halves of the Power Sword. One half is hidden at Eternia’s highest point. The other is beneath its hardest rock. With both halves, he can enter the castle and claim the throne and the secrets of the universe. You are to be the guardian here!

Skeletor manages to get both halves of the sword and tricks Teela into thinking he is the warrior spoken of by the Spirit. Skeletor defies the Spirit of the Castle:

“These things are mine!” he shouted to the unseen Spirit of the Castle. “The secrets of the universe are now at my command. Soon Eternia and all other worlds will belong to me. I am now king!”

We don’t see the Spirit again until the end of the story, after Skeletor has been defeated again.

With Skeletor departed, the Spirit of the Castle appeared again. “I must make sure that the halves of the Power Sword are never again used for evil,” said the chilling voice. “I shall send them into another dimension where even clever Skeletor will have great difficulty finding them.”

“Centuries may pass before the true king comes to claim his throne and fulfill the prophecy of the legend,” said the Spirit. “Go then, Masters of the Universe, and fight evil wherever you find it!”

He-Man and Teela did as ordered. As they departed, the Spirit of the Castle seemed to smile, knowing that at the proper time He-Man would prove himself to be the true King of Castle Grayskull.

Vengeance of Skeletor

In this story, the Spirit appears only at the very end, after the heroes have once again defeated Skeletor and his forces:

“No doubt they will invent new plots of evil,” said the Spirit of the Castle, appearing. “But you, the Masters of the Universe, will be ready for them.”

MOTU Bible

The Masters of the Universe Bible, written December 1982 by Michael Halperin, contains the next appearance of the character, now called the Spirit of Grayskull. In short, in order to hide the power of the Council of Elders and the Hall of Wisdom, the council transformed themselves into the Spirit of the Council. Then the Hall of Wisdom was transformed into the foreboding Castle Grayskull, with “the wisdom” (meaning perhaps the Spirit of the Council?) becoming the Spirit of Grayskull. The relevant text is quoted below:

ZODAC, the wise leader of the Council of Elders, called to the stars for advice. In a shimmering, gleaming beam a figure appeared out of the cosmos — the figure of an elegant and beautiful woman adorned in snake shaped armor and bearing a twisted snake-headed staff.

For centuries Eternia dwelt without fear, the SORCERESS told them, and now the time of testing fell upon the planet. For too long the Council had made all decisions; Their people had lost the ability to think for themselves. The time had arrived to cut the umbilical cord and permit Eternia the right to exist on its own.
The Council listened to the vision which promised them that if ever the forces of evil should try overcoming Eternia a champion would arise to defend the planet. A champion not seen in all the universe. A being so powerful and filled with good that evil, no matter how mighty, could not stand against him. However, with all the champion’s virtue he needed one more element to make him the ultimate ruler of the Universe — he required the collective wisdom of the Elders. And that he would not have until he proved himself against the dark forces.

There Lay the danger. For if the evil powers discovered the secret — this key to destiny — they might destroy all that’s harmonious in Eternia. Once that occurred light would go out all over the planet and it could end with the same fate as Infinita.

Zodac gathered the Council of Elders in the Hall of Wisdom and collectively they concentrated their mind force until the sheer power of their consciousness created a mighty force field. At that moment, an implosion cracked through the corridors of the Hall and the Council disappeared in a blinding flash of energy. Only Zodac retained his human form as one of the Eternia’s guardians. In the Council’s place existed a mass of light at once denser than the densest material in the universe and as light as a ghost. It rose to the topmost parapet of the Hall of Wisdom where the Spirit of the Council looked to the far horizon — past the Evergreen Forest; beyond the Vine Jungle; above and through the Ice Mountains to the sealed Space Portal. It knew that one day an Infinitan would discover how to break the spell. That evil person would search the magnificent Hall of Wisdom. The Spirit, along with Zodac determined that it would not be found — at least not in its present state.

A great aura of energy burst forth from the mass of light which had been the Council of Elders. It surrounded the Hall of Wisdom and an astonishing shuddering and shimmering arose as the very air around the Hall glowed with a cosmic light. Anyone witnessing the experience would have seen in incredible sight – almost mirage-like, the Hall’s very atomic structure shifted; the molecules seemed to run wild as the building changed form.

The wisdom of that which once was the Council understood that the demons of Infinita would look for the magnificent edifice embodying all that it wise and good. But if they saw a dark and forbidding place they might go aside. The wisdom of the Council planned to hide the once beautiful hall behind the rocks, trees and overgrowth of the Evergreen Forest.

When the atoms and molecules slowed the Hall of Wisdom ceased to exist. In its place  stood the dark, green, crenelated fortress of CASTLE GRAYSKULL. Its craggy towers and black windows looked out upon Eternia. The most striking feature of the castle was the entrance. The portal had the face of a skull. The skull’s lower jaw created a jawbridge and anyone wishing to enter had to have immense courage. Behind these walls and within the corridors of Grayskull dwelt the wisdom transformed into the Spirit of Grayskull. The Sorceress remained guarding the castle against all intruders. Zodac would sail the universe, keeping watch over Eternia, keeping vigilance over those who believed in virtue and wisdom, but not interfering with the natural course of events. Thus did Castle Grayskull slowly subside out of sight and the minds of all Eternians except as myth and legend.

MOTU Bible

The transformation of the Hall of Wisdom into Castle Grayskull is actually illustrated in the Kid Stuff story, Castle Grayskull, although the Spirit of Grayskull is not mentioned:

Filmation

The Spirit appears in only one Filmation episode, “Teela’s Triumph.” In the story, the Spirit of Grayskull appears as a floating head in the Eternos Palace courtyard. Clearly this is based on the Halperin Bible, as it’s not called the Spirit of the Castle and it has no visual similarity to the Spirit in the Glut/Alcala stories. He appears to tell Adam, Teela and Man-At-Arms that the Sorceress has disappeared. The Spirit tells Teela that she must guard Castle Grayskull while the others search for the Sorceress.

Screen capture courtesy of Jukka Issakainen

When Teela enters the castle, the Spirit instructs Teela to take her rightful place on the throne of Castle Grayskull. He instructs her in the use of Grayskull’s power and advises her when Skeletor and his minions try to take over. Teela is able to fend off the Evil Warriors until He-Man is able to rescue the Sorceress.

Screen captures courtesy of Jukka Issakainen

The Power of Point Dread

Spirit’s next minicomic appearance would be in The Power of Point Dread, part of a comic/record set that came packed with Point Dread and the Talon Fighter. Like the earliest comics, this was illustrated by Alfredo Alcala. The author of this story, however, is unknown.

In the story, He-Man notes that, after dispatching Skeletor and Beast Man, the Talon Fighter and Point Dread are his key to entering Castle Grayskull when he lands on top of the tower. The Spirit of the Castle appears and addresses him:

“That’s correct, He-Man. Yes, once again, you have saved the Castle from Skeletor, He-Man. I thank you.

“Return now to your city. Skeletor’s spell is broken. The king is well and the monsters have vanished.”

Piu Comics

The Spirit appears several times in the Italian Piu comic series. The Piu series is based closely on the look of the original four Alcala minicomics, so it’s no surprise that the Spirit appears occasionally throughout the series.

The Spirit of the Castle

In this story, we don’t actually see the Spirit, but Teela calls on it using a spell that forces Beast Man and Mer-Man out of the Castle. All of the Piu comic scans in this article come from Ben Massa/Orko’s Keep:

The Mockery

In this story we get to see the actual Spirit of the Castle illustrated, which looks very much like Alfredo Alcala’s interpretation. In the story, Teela warns the Spirit of Skeletor’s immanent arrival so it can thwart his attempt to take over.

This page takes a pose from Alcala’s Danger at Castle Grayskull

Ice and Fire

The Spirit appears again in “Ice and Fire.” In the story, Teela calls on the Spirit to help her save Stratos and Zodac:

Update: Øyvind Meisfjord has pointed out that the Spirit also appears in the Eternia’s Deadly Maze Boardgame:

It also shows up at the end of the “Cloudy Climbs” story in one of the early Golden coloring books:

Personally, I’m quite fond of the original Spirit of the Castle concept. I actually have a very nice custom glow-in-the-dark version of it, shown below. You can read more about that here:

Thank you to the following individuals who are current Patreon supporters!

  • Adam A.
  • Allison T.
  • Ben M.
  • Eric H.
  • João S.
  • Jon E.
  • Max I.
  • Mike G.
  • MotuOriginsCork
  • Orion W.
  • Øyvind M.
  • Philip O.
  • Robert B.
  • That Clyde Guy

Want to support the blog? Consider becoming a Patreon supporter. You’ll also gain access to exclusive content and early access to posts on the blog. Thank you!

2
Heroic Warriors

Strobo (1988 – Unreleased)

Posted on by Adam McCombs

Written by Adam McCombs and Jukka Issakainen

Name: Strobo
Faction: Heroic Warriors
Approximate US release date: March 14, 2013 (MOTU Classics version)

Although never advertised in catalogs, in the late 1980s Mattel had plans to release a wave of figures that would feature 100% reused tooling, the vein of previous characters like Stinkor, Moss Man and Faker. Presumably these figures would have been released in 1988 along with Laser-Light Skeletor and Laser Power He-Man. Six figures made it far enough in the design process for Mattel to commission packaging artwork for them, although of the six, only Strobo had an appearance in vintage media.

Cardback illustration

Strobo appears in two separate pieces of cardback artwork by Errol McCarthy. One was created for Strobo’s packaging, and the other for a Snake Trooper army builder character.

Strobo card art. Image via He-Man.org

Snake Trooper card art. Image via He-Man.org

The illustration below shows which parts Strobo would have been built from:

Interestingly, Strobo’s arms look like Sy-Klone’s arms except for the fins on the outer arms. It’s not clear if this figure would have omitted those fins as depicted in the artwork, or if Errol was displaying a bit of creative license in his illustration.

Update: I’m now adding the action feature artwork by Errol McCarthy that would have gone on the figure’s cardback. The image comes courtesy of Danielle Gelehrter. The artwork probably would have needed to be revised, as it incorrectly identifies the wheel to make the figure spin on the front of the figure’s belt, rather than the back:

US Magazine – Masters of the Universe

Strobo appeared in the Fall 1988 issue of Masters of the Universe Magazine, in a story called The Dark Power of Skeletor. The story is really the continuation of a story arc that started with the Spring 1988 issue story, To Save a World. In that comic, a rogue dark star comes close to Eternia in a rare event. Skeletor tries to harness its power, but in the process almost destroys all of Eternia. Only by He-Man and Skeletor working together is Eternia saved from utter destruction.

From To Save a World. Image source: He-Man.org

In The Dark Power of Skeletor, we learn that a meteor from the dark star had landed on Eternia, and Skeletor used its power to cast a shadow over the land. Anything in the shadow, including Castle Grayskull, was under Skeletor’s control. We find him and his evil warriors occupying the throne room of Castle Grayskull, which is illustrated in the Filmation style. Sorceress in her Zoar form is locked in a bird cage. In order to break the shadow magic, He-Man shines light from his sword onto Strobo’s chest. Strobo spins, bathing the room in light and causing the piece of the dark star to explode into dust.

Image scan by he-man.org member RED.

Image scan by he-man.org member RED.

Image scan by he-man.org member RED. Cleaned by Jukka Issakainen.

Image scan by he-man.org member RED. Cleaned by Jukka Issakainen. Strobo demonstrating his spinning action feature, which he was to share with Sy-Klone.

Full story below:

Note that despite Strobo’s Zodac helmet, there is no mention of his being a Cosmic Enforcer or there having been any connection between himself and Zodac.

So if Strobo was not originally intended to be a Cosmic Enforcer, what lead him to that road?

In the original Filmation He-Man and the Masters of the Universe show, Zodac appears three times. He is portrayed as the Cosmic Enforcer that watches over the Universe. He is not good or evil in the cartoon; we seen an example of that when he gives Skeletor the knowledge of how to obtain the Starseed (“The Search”) which serves as a test for He-Man. But his presence is requested at times when the balance is tipped (“The Quest for He-man”) so fans see him help out the good guys. In the episode “The Golden Disks of Knowledge,” it is revealed that Zodac is the last member of the Council of Wise.

[High-Definition Filmation screencaptures by Jukka Issakainen]

Zodac was also part of the group decision, that sent Zanthor into the Phantom Dimension as punishment for his crimes. Zanthor in his greed had given the Golden Discs to Skeletor. Having had a change of heart, Zanthor wants to atone for his crimes, so he pleads to help retrieve them back as penance. Zodac is called for this occasion and he decides to set Zanthor free from the Phantom Dimension, but only as a ghostly figure. With help from He-Man, they manage to get the Discs back from Snake Mountain.

After they have retrieved the Golden Disks of Knowledge, Zodac says that he will need some help, and turns Zanthor from his ghostly form into a Cosmic Enforcer.

We now see Zanthor sporting the same red armor, dark gray boots, white gloves and red helmet that Zodac wears. From this episode the precedence is set that if you join the Cosmic Enforcers, that armor and red helmet are part of the uniform. They embark on their journey together, each turning into a white ball of energy as they bid farewell to He-Man and the other heroes.

It doesn’t seem that Mattel made the connection with Zodac’s helmet and the Cosmic Enforcers when they were creating Strobo. Indeed, Strobo seems to have more in common with Sy-Klone than Zodac. The canon of Masters of the Universe was never tightly controlled, and it was rebooted several times, even in the 1980s. The people who developed Strobo may not have even known about “The Golden Discs of Knowledge.” And of course in some 80s media Zodac had been retconned as an Evil Warrior. Strobo’s name and main gimmick with a reflecting light in the magazine story demonstrates that the approach was more leaning to the Sy-Klone direction, and not as a member of the Cosmic Enforcers.

Masters of the Universe Classics toyline

Strobo was released in the Masters of the Universe Classics Toyline as a traveling convention figure, periodically made available online and at conventions throughout 2013. Because the source material at the time was only the MOTU Magazine story and not the Errol McCarthy art (which hadn’t been revealed yet), Strobo was not released with a repainted Sy-Klone shield. Instead he came with a piece of the dark star, complete with stand, and an extra unhelmeted head intended for Zodak, the 200x Cosmic Enforcer. He was supposed to come with a Four Horsemen-created strobelight gun as well, but it was cut for cost. Later it would be released in a weapons pack.

MOTU Classics Strobo prototype with planned accessories. Note that the middle line down his helmet is painted silver, not red.
Strobo action figure

In the bio that came with Strobo, he was re-written as the Cosmic Enforcer who replaced Zodac after his death (there were a lot of deaths in the MOTU Classics bios). The bio says he was “forcefully maintaining neutrality in He-Man’s absence” which sounds like a contradiction in terms. Bits and pieces of the bios have been used in more recent story canons, and the aspect of Strobo being a Cosmic Enforcer is one element that carried forward. The “real name” was invented for the Classics line, and has not been used in any media after it.

Strobo carback and bio. Image via eBay

Since Strobo was a Traveling Convention Exclusive figure by Mattel, German fans found a cool way to advertise him on the back cover to the Grayskull Convention 2013 exclusive minicomic “Under Grayskull’s Flag” (art by Daniele “Danbrenus” Spezzani).

Classics Mini-Comics

Below is the original pencil layout page spread for MOTU Classics mini-comic issue #8 by Axel Giménez, where Strobo is included close to King He-Man and Orko in the battle scene.

Final artwork altered and omitted some characters. Artwork by Jordi Tarragona and color by Carrie Strachan.

The coloring on Strobo’s helmet appears to be based on the Classics prototype version, where the middle line across the helmet is not colored red.

DC Comics

A brief appearance for Strobo occurs in the He-Man and the Masters of the Multiverse comic mini-series from DC Comics issue #3. This is the first time that after the Classics toyline associated Strobo as part of the Cosmic Enforcers, that it is acknowledged in another media outside of it. Art by Dan Fraga & color by Matt Yackey.

As the Anti-Eternia He-Man is on his quest, he is stopped at the Interrealm by Zodac, Zanthor, Strobo, Apokrifa, Zodak and the Mighty Spector. Though in the next page it appears that Anti-Eternia He-Man prevailed against the Cosmic Enforcers of the Multiverse and continues on his rampage.

Masters of the Universe Revolution

In the Netflix animated series Masters of the Universe Revolution, we catch a glimpse of Zodac speaking to Evil-Lyn in episode 05. And next to Zodac (on his right side) is Zanthor and on the other side is Strobo. Neither Zanthor nor Strobo have any dialogue in this ending teaser.

In a close up shot of Strobo, it appears that his right hand is not wearing the red glove. But that might just be a small coloring error.

Thank you to the following individuals who are current Patreon supporters!

  • Adam A.
  • Allison T.
  • Ben M.
  • Eric H.
  • João S.
  • Jon E.
  • Max I.
  • MotuOriginsCork
  • Orion W.
  • Øyvind M.
  • Philip O.
  • Robert B.
  • That Clyde Guy

Want to support the blog? Consider becoming a Patreon supporter. You’ll also gain access to exclusive content and early access to posts on the blog. Thank you!

Special thanks to Jukka for adding the color to the header image!

16
Customs, Evil Warriors

Barbarossa Laser-Light Skeletor Kit

Posted on by Adam McCombs
Written by Adam McCombs

More than a year ago I purchased the Barbarossa Custom Creations Laser-Light Skeletor Kit. Life got in the way and I didn’t actually start working on it until a few months back. Now that I’ve finished it, I thought I’d post my thoughts.

First thing’s first, Toy Polloi has created a fantastic step-by-step video detailing how to paint, glue and wire this figure together. I found his video invaluable for each step of the process:

Barbarossa has made some tweaks to the kit since I purchased mine, changing the leg joints to the rubber band type and making the staff two-piece. Still, the basic principles haven’t really changed. Here is my set all laid out. Following the advice of Toy Polloi, I also bought a button cell battery holder to make life easier, which I think is included in the current kit. Your kit will probably have some mold “flash” that will need to be trimmed with an exacto knife.

The first step is to get it painted up, starting with painting the trunks black. The belt is left unpainted. I use the inexpensive acrylic paints found at craft and hobby stores, which seem to work just fine. In this case, because the black paint I used was flat, I went over it with a glossy acrylic clear coat later to simulate black molded plastic. Note: avoid enamel paints, they tend to be tacky and don’t dry well.

Next up I worked on the metallic costume parts integrated into the character’s flesh. I found that starting with a flat black base coat on these elements made life easier. Not only did it help metallic copper acrylic paint adhere better to the figure, it also made it look nicer. This requires time and patience – the lines are fairly delicate here, and you want to try to be precise. It required many passes to get it all filled out nicely, with time in between each coat for drying.

For the face, I started with a greenish base, then added yellow elements, and finally black for the eye sockets, nose, mouth and teeth. I also added a glossy clear coat over top after everything was dry. If you like you can also paint the inside of the head pieces, which will prevent light from the LED from glowing through the otherwise unpainted plastic. I didn’t do that on mine, but it’s an option.

The first section to glue together is the crotch piece and legs. It’s fairly simple – the legs go into the back of the crotch piece (the “butt”), and then the front piece is glued in place to keep everything together. I used Gorilla super glue for this task. The head can also be glued together at this time. Update: before gluing together you may wish to coat the interior of the head with black paint to avoid light leaking through the plastic when the LED activates. You may wish to do the same on the interior surfaces of the right arm.

Be sure to include the transparent red “eyes” piece, which will transmit the light from the LED out to the eye sockets. The last thing that can be glued before wiring the light feature is the the left hand to the left arm. You may need to file/trim the flat edges of the left arm pieces to ensure a nice even fit before gluing. Ensure even coverage for a strong connection.

Before any more gluing, you will need to first wire up the light-up feature. I recommend following the Toy Polloi video, but I’ll note that you’ll need a soldering iron, some solder, and some small craft wire cutters at minimum. I’ve done soldering before, but if you haven’t, you might practice adhering two pieces of scrap wire together with solder until you feel confident. Based on Toy Polloi’s video, I put together the following wiring diagram:

Red lines = positive wire. Blue lines = ground wire.

After wiring it up, I did a quick test to make sure everything was lighting up correctly:

My particular kit had some fairly long wire. Initially, I had left the wire too long, and it couldn’t be crammed in to the body. I had to go back and unsolder some of the wires running to the switch and battery holder, clip them shorter, and resolder them. You’ll want to protect bare soldered ends with heat shrink tubing or electrical tape to keep the circuit from shorting out.

Once the wiring is in good shape, it’s time to assemble the figure. The two halves of the chest come together like a clamshell, as do the two halves of the right arm. You have to make sure that the pelvis, right arm and head are in place before gluing together. The left arm can be put on after everything is set and dried. Again I recommend following Toi Polloi’s video closely. If you do what he does, you’ll probably get it right! The black battery pack is really just there to hold the switch in this version of the figure, and it fits into the back with no gluing necessary (and you’ll need to be able to take it out from time to time to change batteries). The button cell battery holder will end up in the figure’s belly, sitting there loosely.

Here it is, assembled, without cape:

Here it is with a cape I made using Toy Polloi’s cape pattern, and the light-up feature activated:

And here it is in the dark! The lights are very red in person, but they look almost white on video for some reason.

I hope you enjoyed this brief look at the Barbarossa Custom Creations Laser-Light Skeletor kit. It does require some time and patience to assemble, but it’s also the most economical way to get yourself a very nice looking Laser-Light Skeletor repro!

Thank you to the following individuals who are current Patreon supporters!

  • Adam A.
  • Allison T.
  • Ben M.
  • Eric H.
  • João S.
  • Jon E.
  • Max I.
  • MotuOriginsCork
  • Orion W.
  • Øyvind M.
  • Philip O.
  • Robert B.
  • That Clyde Guy

Want to support the blog? Consider becoming a Patreon supporter. You’ll also gain access to exclusive content and early access to posts on the blog. Thank you!

0